Level 3 Level 4 Level 5 Descriptions
Setup Receive Memory
Receive
- Set the machine to forward fax messages, to store
incoming faxes in the memory (so you can retrieve
them while you are away from your machine).
If you select Fax Forward, you can turn on the Backup
Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of incoming
faxes.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification
Report.
Journal
Period
- Set the interval for automatic printing of the Fax
Journal.
If you select an option other than Off and Every 50
Faxes, you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Print Document
- - Print incoming faxes stored in the machine's memory.
Remote Access
- - Set your own code for Remote Retrieval.
Dial
Restriction
Dial Pad
- Restrict dialling when using the dial pad.
Address Book
- Restrict the dialling when using the Address Book.
Shortcuts
- Restrict the dialling when using a Shortcut.
Remaining Jobs
- - Check which scheduled jobs are in the machine's
memory and cancel selected jobs.
Miscellaneous Caller ID
Type
- Switch the mode if Caller ID cannot be displayed
normally.
Fax Mode
- Select the transmission process when sending/
receiving the faxes manually.
[Network]
[All Settings] > [Network]
Level 3
Level 4 Level 5 Level 6 Descriptions
Wired LAN TCP/IP BOOT Method
- Select the Boot method that
best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS
configuration mode.
WINS Server
- Specify the IP address of the
primary or secondary WINS
server.
DNS Server
- Specify the IP address of the
primary or secondary DNS
server.
APIPA
- Set the machine to allocate
the IP address from the link-
local address range
automatically.
534
To Next Page
Loading...
Need help?
General
Weight and Dimensions
