Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Setting
Change the Check Paper Setting
If this setting is set to [On] and the paper tray is removed or you load paper in the MP tray, the LCD displays a
message allowing you to change the Paper Size and Paper Type settings.
The default setting is [On].
1. Press
[Settings] > [All Settings] > [General Setup].
2. (MFC-J3940DW) Press [Tray Setting].
3. Press a or b to display the [Check Paper] option, and then press it.
4. Press [On] or [Off].
5. Press
.
Related Information
• Paper Settings
Related Topics:
• Load Photo Paper in Paper Tray #1
• Load Envelopes in Paper Tray #1
• Error and Maintenance Messages
• Load A4, Letter, or Executive Size Paper in Paper Tray #1 / Paper Tray #2
58
To Next Page
Loading...
