Brother MFC-J415W - Sleep Mode; LCD Display; LCD Contrast

Chapter 1
2
Sleep Mode 1
You can choose how long the machine will
remain idle (from 1 to 60 minutes) before it
goes into sleep mode. The timer will restart if
any operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode .
Press OK.
d Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins.
Press OK.
e Press Stop/Exit.
LCD display 1
LCD Contrast 1
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose LCD Contrast.
Press OK.
e Press d or c to change lighter or darker.
Press OK.
f Press Stop/Exit.