4
DO NOT place any objects around the product. Such objects block the access to the power outlet
in case of emergency. It is important that the product can be unplugged whenever needed.
When multiple devices, including this product, are connected to a computer using USB cables,
you may feel an electric charge when you touch metal parts of the product.
• DO NOT place your product next to devices that contain magnets or generate magnetic fields.
Doing so may interfere with the operation of the product, causing print quality problems.
• DO NOT place your product next to sources of interference, such as speakers or the base units
of non-Brother cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
• DO NOT put objects on top of the product. Doing so could increase the risk of overheating
should the product malfunction.
• DO NOT place anything in front of the product that will block printed pages or received faxes.
DO NOT place anything in the path of printed pages or received faxes.
• DO NOT tip the product after the ink cartridges are installed. Doing so may cause ink spillage
and internal damage to the product.
To use the product safely 1
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In
addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the product. Before you access the inside of the
product, including for routine maintenance such as cleaning, make sure you have unplugged the
power cord from the AC power outlet, as well as any telephone/RJ-11 or Ethernet/RJ-45
(Models with Wired LAN function only) cables from the product.
DO NOT push objects of any kind into this product through slots or openings in the cabinet, as
they may touch dangerous voltage points or short out parts.
To Next Page
Loading...
Need help?
General
