8
8
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
uuBasic User’s Guide: Using Receive Modes
If you are not using this machine for faxing, go to the
next step.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose Setup Receive.
Press OK.
d Press a or b to choose Receive Mode.
Press OK.
e Press your preferred receive mode.
Press OK.
f Press Stop/Exit.
9
Enter personal
information (Station ID)
Set your machine’s Station ID so that the date and
time appear on each fax you send.
If you are not using this machine for faxing, go to the
next step.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Station ID.
Press OK.
d Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a “+” for
international codes, press l.
e Enter your name (up to 20 characters) using
the dial pad, and then press OK.
f Press Stop/Exit.
No
Yes
Yes
No
No
Yes
Do you want to use the telephone features of your
machine (if available), an external telephone or
external telephone answering device connected on the
same line as the machine?
Do you want the machine to
answer fax and telephone calls
automatically?
Are you using the voice message
function of an external telephone
answering device?
Manual
Fax Only
Fax/Tel
External TAD
You control the telephone
line and must answer every
call yourself.
Your external telephone
answering device (TAD)
automatically answers every
call. Voice messages are
stored on the external TAD.
Fax messages are printed.
Your machine controls the
line and automatically
answers every call. If the
call is not a fax, the
telephone will ring for you
to pick up the call.
Your machine automatically
answers every call as a fax.
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, and then press Clear.
• For more information uuBasic User’s Guide:
Entering Text
Press
key
One
time
Two
times
Three
times
Four
times
Five
times
2 ABC2A
3 DEF3D
4 GH I 4G
5 JKL5J
6 MNO6M
7 PQRS 7
8 TUV8T
9 WXY Z 9
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
