Chapter 2
12
c Gently press and slide the paper
guides (1) to fit the paper size. Make
sure the triangular mark (2) on the paper
guide (1) lines up with the mark for the
paper size you are using.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
Always make sure the paper is not curled
or wrinkled.
e Gently load paper in the paper tray with
the printing surface face down. Check
that the paper is flat in the tray.
Portrait orientation
2
f Gently adjust the paper guides (1) to fit
the paper. Make sure the paper guides
touch the sides of the paper.
g Check that the paper is flat in the tray
and below the maximum paper
mark (1). Overfilling the paper tray may
cause paper jams.
(MFC-J5520DW/J5620DW)
Go to step i.
(MFC-J5720DW) Go to step h.
h Extend Tray #2 under Tray #1 to keep
the machine stable.
1 Pull Tray #2 out of the machine.
To Next Page
Loading...
