11
11
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 of the Basic User’s
Guide.
12
Set Tone or Pulse dialing
mode
(Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Tone/Pulse.
Press Tone/Pulse.
d Press Pulse (or Tone).
e Press Stop/Exit.
13
Set the telephone line
compatibility (VoIP)
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Compatibility.
Press Compatibility.
d Press s or t to display Basic(for VoIP).
Press Basic(for VoIP).
e Press Stop/Exit.
14
Automatic Daylight
Savings Time
You can set the machine to change automatically for
daylight savings time. It will reset itself forward one
hour in the spring and backward one hour in the fall.
a Press Menu.
b Press General Setup.
c Press s or t to display Auto Daylight.
Press Auto Daylight.
d Press On (or Off).
e Press Stop/Exit.
If you are using an analog telephone line you can
skip this step.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
