Brother MFC-J615W - Checking the Print Alignment

62
Checking the print alignment A
You may need to adjust the print alignment
after transporting the machine, if your printed
text becomes blurred or images become
faded.
a Press Menu.
b Press a or b to choose
Ink Management.
Press OK.
c Press a or b to choose Test Print.
Press OK.
d Press a or b to choose Alignment.
Press OK.
e Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
g Do one of the following:
 If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
step j.
 If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
h For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
i For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
j Press Stop/Exit.