EasyManuals Logo

Brother MFC-J6510DW Advanced User's Guide

Brother MFC-J6510DW
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Chapter 4
24
Remote Fax commands 4
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by ), the system will give
two short beeps and you must enter a remote command.
Remote commands Operation details
95 Change the Fax Forwarding,
Paging or Fax Storage settings
1 OFF You can choose Off after you have retrieved or erased all
your messages.
2 Fax Forwarding One long beep means the change is accepted. If you hear
three short beeps, you cannot make a change because
something has not been set up (for example, a Fax
Forwarding or Paging number has not been registered).
You can register your Fax Forwarding number by entering
4. (See Changing your Fax Forwarding number
on page 25.) Once you have registered the number, Fax
Forwarding will work.
3 Paging
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to receive stored
fax messages. (See Retrieving fax messages on page 25.)
3 Erase faxes from the memory If you hear one long beep, fax messages have been erased
from the memory.
97 Check the receiving status
1 Fax You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
98 Change the Receive Mode
1 External TAD If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90 Exit Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.

Table of Contents

Other manuals for Brother MFC-J6510DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J6510DW and is the answer not in the manual?

Brother MFC-J6510DW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Economical printingYes
Duplex printing modeAuto
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle- pages per month
Number of print cartridges4
Scan toE-mail, File, FTP, Image, OCR
Scanner typeFlatbed & ADF scanner
Grayscale levels256
Input color depth48 bit
Maximum scan areaA3 (297 x 420) mm
Output color depth24 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution2400 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory400 pages
Modem speed33.6 Kbit/s
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)100
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity50 sheets
Total number of input trays1
Auto document feeder (ADF) input capacity35 sheets
Processor familyRISC
Compatible memory cardsMemory Stick (MS), MMC, MS PRO, SD, SDHC
Sound pressure level (printing)50 dB
DisplayLCD
Product colorBlack
Display diagonal3.3 \
Market positioningBusiness
Custom media width148 - 297 mm
Maximum print size297 x 432 mm
Custom media length148 - 431.8 mm
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Paper tray media weight64 - 220 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A3, A4, A5, A6
Photo paper sizes (imperial)5x7, 5x8 \
Borderless printing media sizes5x7, A3, A4, A6, Index card, Letter
Maximum ISO A-series paper sizeA3
Auto Document Feeder (ADF) media weight64 - 90 g/m²
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms128-bit WEP, 64-bit WEP, SSID, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK
Mobile printing technologies-
Standard interfacesUSB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Scan speed3.49 sec/page
Dimensions (WxDxH)540 x 489 x 257 mm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, fax, print, scan
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)7.5 W
Power consumption (PowerSave)4 W
Power consumption (average operating)26 W
Sustainability certificatesENERGY STAR
Package weight22.400 g
Bundled softwareBrother MFL-Pro Suite\\r Brother ControlCentre4 (Win)\\r Nuance® Paperport® 12 SE + OCR (Win)\\r Reallusion® FaceFilter Studio (Win8)\\r Brother ControlCentre2 (Mac)\\r NewSoft® Presto!® PageManager9 (Mac)
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supportedWindows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Weight and Dimensions IconWeight and Dimensions
Depth489 mm
Width540 mm
Height257 mm

Related product manuals