Routine maintenance
69
A
Cleaning the machine’s
printer platen A
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid an electrical shock.
a Using both hands, use the plastic tabs
on each side of the machine to lift the
scanner cover into the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
DO NOT touch the plate (2) and lever (3).
Doing this may cause damage to the
machine.
Cleaning the paper feed
rollers A
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
a Unplug the machine from the AC power
outlet. Pull the paper tray completely out
of the machine.
If the paper support flap is open, close it,
and then close the paper support.
b Clean the front side of the Paper Feed
Rollers (1) with a soft lint-free cloth
moistened with water, using a
side-to-side motion.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
13
2
1
To Next Page
Loading...
