Brother MFC-J6510DW

Configuring your machine for a wireless network
9
3
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
a Confirm your network environment. (See page 11.)
b Confirm your wireless network setup method. (See page 12.)
c Configure your machine for a wireless network. (See page 15.)
Wireless configuration and installing drivers and software have been completed.
 Infrastructure mode
Connected to a computer with a WLAN access
point/router
or
 Ad-hoc mode See page 10.
Connected to a wireless capable computer without
a WLAN access point/router
Using the
WPS/AOSS™
control panel menu
(Recommended)
Using the Setup
Wizard from the
control panel
Using the Brother
installer
application
Using the PIN
Method of Wi-Fi
Protected Setup
Using WPS/AOSS™, a USB or a
network cable
See the Quick Setup
Guide.
See the Quick Setup
Guide.
See page 20. See page 18.
Installing drivers and software (See the Quick Setup Guide.)