Brother MFC-J6510DW

Control panel setup
28
5
Mail Address 5
You can set your machine’s E-mail address.
Setup Server 5
SMTP Server 5
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
SMTP Port
5
This field displays the SMTP port number (for outgoing E-mails) on your network.
Auth. for SMTP 5
You can specify the security method for E-mail notification. (For details on the security methods for E-mail
notification, see Sending an E-mail securely on page 54.)
POP3 Server 5
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
POP3 Port
5
This field displays the POP3 port number (for incoming E-mails) used by the Brother machine.
Mailbox Name
5
You can specify a mailbox name on the POP3 server where the Internet print jobs are to be retrieved.
Mailbox Pwd
5
You can specify the password for the POP3 server account where the Internet print jobs are to be retrieved.
Note
To set for no password, enter a single space.
APOP 5
You can enable or disable the APOP (Authenticated Post Office Protocol).
Setup Mail RX 5
Auto Polling 5
When set to On, the machine automatically checks the POP3 server for new messages.