Brother MFC-J895DW - Page 557

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust
the Machine Volume
Adjust the Machine Volume
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Volume]. Press OK.
3. Press a or b to select one of the following options:
Option Description
Ring
Adjust the ring volume.
Beep
Adjust the volume when you press a button, make a mistake, or after you send or receive a fax.
Speaker
Adjust the speaker volume.
4. Press OK.
5. Press a or b to select the [Off], [Low], [Med], or [High] option. Press OK.
6. Press Stop/Exit.
MFC-J690DW/MFC-J895DW
1. Press [Settings] > [All Settings] > [General Setup] > [Volume].
2. Press one of the following options:
Option Description
Ring
Adjust the ring volume.
Beep
Adjust the volume when you press a button, make a mistake, or after you send or receive a fax.
Speaker
Adjust the speaker volume.
3. Press a or b to display the [Off], [Low], [Med], or [High] option, and then press the option you want.
4. Press .
Related Information
• General Settings
550