EasyManuals Logo

Brother MFC MFC-290C User Manual

Brother MFC MFC-290C
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
4
Install the ink cartridges
WARNING
If ink gets in your eyes, wash them out with
water at once, and if irritation occurs consult a
doctor.
a Make sure that the power is turned on.
The LCD shows:
No Cartridge
b Open the ink cartridge cover a.
c Remove the green protective part a.
d Unpack the ink cartridge.
e Turn the green knob on the protective yellow
cap clockwise until it clicks to release the
vacuum seal, then remove the cap a.
f Take care to match the color of the lever a
with the cartridge color b, as shown in the
diagram below.
g Install each ink cartridge in the direction of the
arrow on the label.
Note
Do not throw away the green protective part. You
will need it if you transport the machine.
1
1
1
2
1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC MFC-290C and is the answer not in the manual?

Brother MFC MFC-290C Specifications

General IconGeneral
ConnectivityUSB
Scanner TypeFlatbed
Standard Media Capacity100 sheets
Print TechnologyInkjet
FunctionsCopier, printer, scanner, fax
PC ConnectivityYes
Media TypePlain paper
Ink CartridgeBrother LC51BK, Brother LC51C, Brother LC51M, Brother LC51Y

Related product manuals