7
5
Check the print quality
a When the preparation process has finished, the
LCD shows this message
.
Set Paper and
q
Press Start
Press Color Start.
b Check the quality of the four color blocks a on
the sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
If you can see missing short lines, press 2 (No)
on the dial pad and go to d.
d The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
.
Black OK?
q
1.Yes 2.No
.
Color OK?
q
1.Yes 2.No
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
.
Start Cleaning?
q
1.Yes 2.No
e Press 1 (Yes), the machine will then start
cleaning the colors.
f After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
6
Choose your language
(If needed)
a Press Menu.
b Press 0.
c Press 0.
d Press a or b to choose your language.
Press OK.
e Press Stop/Exit.
OK
Poor
1
To Next Page
Loading...
Need help?
General
