26
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below:
a Make sure the machine is idle.
b Press Menú (Menu).
c Press 5 to choose 5.Network.
d Press 0 to choose 0.Network Reset.
e Press 1 to choose 1.Reset.
f Press 1 to choose 1.Yes.
g The machine will restart, and the reset is complete.
Entering Text for Wireless Settings
Most number keys have three or four letters printed on them. The keys for 0, # and l do not have printed letters
because they are used for special characters.
By pressing the correct number key repeatedly, you can access the character you want.
Inserting spaces
To enter a space in a name, press c twice.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, and then press Borrar (Clear). Enter the correct character. You can also back up and insert a character.
Repeating characters
If you need to enter a character that is on the same key as the character before, press c to move the cursor to the
right before you press the key again.
Special characters and symbols
Press l, # or 0 repeatedly until you see the special character or symbol you want.
Press l for
(space) ! ” # $ % & ’ ( ) + , - . /
Press # for : ; < = > ? @ [ ] ^ _
Press 0 for 0 \ { | } ~
To Next Page
Loading...
