Brother MFC-T800W - Understanding the Manual

9
10
Set your Station ID
Set your machine’s Station ID so that the date and
time appear on each fax you send.
If you are not using this machine for faxing, go to the
next step.
a Press Menú (Menu), 0, 2.
2.Station ID
b Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
c Enter your name (up to 20 characters) using
the dial pad, and then press OK.
d Press Detener/Salir (Stop/Exit).
11
Transmission
Verification Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 of the Basic User’s
Guide.
NOTE
• See the following chart for entering your name.
• To enter a space in a fax number, press c once
between numbers. To enter a space in a name,
press c twice between characters.
• If you need to enter a character that is on the
same key as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, and then press Borrar
(Clear).
Press
key
One
time
Two
times
Three
times
Four
times
Five
times
2 ABC2A
3 DEF 3D
4 GH I 4G
5 JKL5J
6 MNO 6M
7 PQRS 7
8 TUV8T
9 WXY Z 9
NOTE
If you make a mistake and want to start again,
press Detener/Salir (Stop/Exit) and go back
to a.