7
2
Pass the tape halfway through the long narrow hole in the stick.
3
Turn the stick three-quarters of a turn towards you and pull the stick away from you as
shown below.
4
Peel off the label backing.
NON-LAMINATED TAPE
Labels printed on non-laminated tapes can be folded
in half so that the inside edges of the two backing
pieces come off the label, enabling the backing to
easily be peeled off.
INSTANT-LETTERING TAPE (RUB-ON TRANSFERS)
Instant-lettering tape is used to transfer your text onto
paper. After printing the text onto instant-lettering tape and
cutting off the label, position the label on a sheet of paper.
By simply rubbing the instant lettering tape’s non-printed
side with a stick, you can transfer the text directly onto the
paper.
☞
Hold the tape very firmly and do not move it while
rubbing the tape.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an
iron. After printing the text onto fabric tape and cutting off the label using scissors
, place the
label on an ironed garment at the location where you wish to attach it in such a way that the
printed text can be read correctly. Cover the label with another piece of cloth and use an
iron set to a medium-high temperature (160 to 180 ˚C) to press down firmly for 10 to 15 sec-
onds. For more details, refer to the instructions included with the fabric tape cassette.
GH
ABCDEF
ABCDEF
ABC
To Next Page
Loading...
Need help?
General
