83
NUMBER
TOO SMALL!
• This message appears if
the number that is set to be
printed using the Number-
ing function is less than the
number above the cursor.
• Press the key of a number
that is greater than the
number in the text.
REPLACE
BATTERIES!
• This message appears if
the installed alkaline bat-
teries are about to run out.
• Replace the batteries or
use the AC adapter.
ROM
PROBLEM!
• This message appears if
there is a problem with the
machine’s read only mem-
ory.
• Contact your service repre-
sentative.
SYSTEM
ERROR!
• This message appears if
there is a problem with the
machine’s software.
• Contact your service repre-
sentative.
TAB
LIMIT!
• This message appears if 50
tabs have already been
added to the text when you
press .
• Limit the number of tabs in
the text to 50.
TAPE
EMPTY!
• This message appears if you
try to print a label or feed
the tape when no tape cas-
sette is installed.
• Install a tape cassette and
try again.
TEXT
HIGH!
• This message appears if
the size of the text is larger
than the width of the
installed tape.
• Reduce the size of the
characters or install a
wider tape.
TEXT
LONG!
• This message appears if
the length of the text is
longer than the label
length that has been set
using the Length function.
• Delete some of the text,
reduce the character width
or increase the set label
length.
Error Message Cause Remedy
Tab Set
Q
To Next Page
Loading...
