17
The Delete (backspace) key ( * ) allows you to remove characters to the left of the cursor’s
current position. It differs from the left cursor key ( f ), which only moves the cursor with-
out deleting any characters.
The delete key can also be used to quit most functions and return to the previous display with-
out changing the text.
Some questions asking you to confirm a command may appear on the LCD display, especially
when the function that you have chosen will delete or affect files. In these cases, pressing *
is like answering “no”.
☞ To answer “yes”, press r. Refer to RETURN KEY on page 14.
To delete one character:
1 Press f, w, h or e to position the cursor below the character immediately to
the right of the character that you wish to delete.
2 Press * once.
2
Press e until 1.0 is displayed.
3 Press r.
To add a tab:
● Hold down c and press Q once.
To Next Page
Loading...
