To Next Page
T
terryscottSep 1, 2025
What does 'Too Much Text For This Layout' mean on Brother P-touch 2030 Label Maker?
- AAndrea NormanSep 1, 2025
Edit the text to use fewer characters or use a different layout on your Brother Label Maker.
What does 'Too Much Text For This Layout' mean on Brother P-touch 2030 Label Maker?
Edit the text to use fewer characters or use a different layout on your Brother Label Maker.
What does 'Text Too Long' mean on a Brother P-touch 2030 Label Maker?
Edit the text to fit within the set length or change the length setting on the Brother Label Maker.
What to do if Brother P-touch 2030 Label Maker says 'Installed tape is not compatible with this machine'?
Use compatible tape with the Brother Label Maker.
What to do if Brother P-touch 2030 screen locks?
To solve the issue when the Brother Label Maker screen locks or becomes unresponsive, reset the internal memory to the initial settings. If resetting doesn't work, disconnect the AC adapter and remove the batteries for more than 10 minutes.
Why is the display blank on my Brother P-touch 2030?
If the display on your Brother Label Maker remains blank after you turn it on, check that the batteries are correctly installed. Also, make sure that the AC adapter (designed exclusively for your P-touch) is properly connected.
Why does my Brother P-touch 2030 stop while printing a label?
If your Brother Label Maker stops printing mid-label, it could be due to a couple of reasons. If you see striped tape, it means you've reached the end of the tape and you should replace the tape cassette. Alternatively, try replacing all the batteries or connecting the AC adapter directly to the label maker.
How to fix a Brother P-touch 2030 Label Maker that is not printing correctly?
If your Brother Label Maker isn't printing labels correctly, try removing the tape cassette and reinstalling it, pressing firmly until it clicks into place. If the print head is dirty, clean it using a cotton swab or an optional print head cleaning cassette (TZ-CL4).
General| Series | P-touch |
|---|---|
| Print Technology | Thermal Transfer |
| Maximum Print Width | 12 mm |
| Print Resolution | 180 dpi |
| Tape Sizes | 3.5 mm, 6 mm, 9 mm, 12 mm |
| Display | LCD |
| Keyboard | QWERTY |
| Cutter | Manual |
| Print Speed | 10 mm/sec |
| Tape Cassettes | TZe |
| Display Size | 1 line |
| Font Styles | Normal, Bold, Outline, Shadow |
| Built-in Symbols | Yes |
| Power Supply | AC adapter or 6 AA batteries |
Describes how the manual was compiled and any notice regarding changes.
Details specific warranty, repair, and support information for Australian users.
Checks the package contents before using the P-touch.
Identifies the main parts of the P-touch unit and tape cassette compartment.
Explains the P-touch LCD display layout and keyboard functions.
Details the purpose and operation of each key on the P-touch keyboard.
Covers installation of batteries and connection of the AC adapter for power.
Guides on inserting tape cassettes into the P-touch.
Explains how to power the P-touch on and off.
Describes the procedure for feeding tape, including the feed function.
Details how to change the contrast setting of the LCD display for better readability.
Guides on selecting the display language and measurement unit (mm/inch).
Covers basic text input, line breaks, and cursor movement for label creation.
Explains how to insert various symbols available on the P-touch.
Guides on adding special characters and accents for international languages.
Details how to adjust font, size, style, and alignment for text elements.
Describes how to automatically adjust text size to fit within label length.
Covers setting frames, label length, and tab length for label design.
Explains how to create labels using predefined templates or block layouts.
Guides on creating labels using various pre-defined block structure layouts.
Details the process of generating and entering data for bar codes.
Allows checking the label layout before printing to ensure correct design and appearance.
Instructions for printing one copy of the created label.
Guides on how to print up to 9 copies of the same label.
Explains how to create sequential numbered labels from a single format.
Describes how to print labels in reverse for viewing on transparent materials.
Specifies tape cutting options and margins to reduce wasted tape.
Details how to adjust the printed label length in incremental levels.
Provides instructions on how to position and firmly attach the printed label.
Guides on printing pre-designed labels stored in the machine's collection.
Explains how to save created labels for later use and recall.
Guides on retrieving previously saved labels from memory.
Details how to print labels that have been previously saved.
Covers the process of removing unwanted saved label files.
Restores the P-touch to factory settings to clear memory or resolve issues.
Instructions for wiping the main unit with a soft, dry cloth to remove dust and marks.
Guides on cleaning the print head to resolve streaks or poor quality characters.
Details how to clean the cutter blade to prevent tape jamming.
Provides solutions for common operational problems and unresponsiveness.
Lists possible error messages and their corresponding causes and remedies.
Lists the technical specifications and features of the P-touch unit.
