103
LENGTH
LIMIT!
• This message appears if the
text is longer than 1 meter
when you try to print.
• Shorten the text to less than 1
meter before trying to print.
• This message appears if the
Length function is used to set
a label length that is less than
4.0 cm or more than 30.0
cm.
• Set the label length between
4.0 cm and 30.0 cm.
• This message appears if the
Tab Length function is used
to set a tab length that is
more than 30.0 cm.
• Set the tab length so that it is
less than 30.0 cm.
LINE
LIMIT!
• This message appears if the
number of lines in the text is
greater than the maximum
number of lines possible for
the installed tape.
• Reduce the number of lines
or install a tape of greater
width.
MEMORY
FULL!
• This message appears if you
try to store a text file after
2500 characters have already
been stored in the memory.
• Delete an unwanted file to
make room for the new one.
NO
FILES!
• This message appears if you
try to recall or delete a text
file from the memory when
none are stored.
• Store a text file first.
REPLACE
BATTERIES!
• This message appears if the
installed alkaline batteries
are about to run out.
• Replace the batteries or use
the AC adapter.
ROM
PROBLEM!
• This message appears if there
is a problem with the
machine’s read only mem-
ory.
• Contact your service repre-
sentative.
SET 24mm! • This message appears if a 24-
mm-wide tape cassette is not
installed when a layout for
24-mm-wide tape is selected.
• Install a 24-mm-wide tape
cassette.
Error Message Cause Solution
To Next Page
Loading...
