105
TEXT
LONG!
• This message appears if the
length of the text is longer
than the label length that has
been set using the Length
function.
• Delete some of the text,
reduce the character width,
or increase the set label
length.
• This message appears if you
try to enter text that is longer
than the preset length of a
layout field of the Auto for-
mat function.
• Delete some of the text.
WRONG
ADAPTER!
• This message appears if a
high-voltage adapter is
being used.
• Remove the high-voltage
adapter and connect the
adapter designed exclusively
for this machine.
Error Message Cause Solution
To Next Page
Loading...
