9
INSTANT-LETTERING TAPE (RUB-ON TRANSFERS)
Instant-lettering tape is used to transfer your text onto paper. After printing the text onto
instant-lettering tape and cutting off the label, position the label with its non-printed side fac-
ing up on a sheet of paper. By simply rubbing the instant lettering tape’s non-printed side with
the enclosed stick, you can transfer the text directly onto the paper.
☞
Hold the tape very firmly and do not move it while rubbing the tape.
IRON-ON TRANSFER TAPE
Iron-on transfer tape is used to transfer your text onto garments using an iron.
1
Insert an iron-on transfer tape cassette, press to print the text, then push down on
the tape cutter lever to cut off the label.
2
Iron the garment to flatten it before transferring the text.
3 Place the label on the garment at the location where you wish the text to be transferred.
4 Set the iron to cotton (150 to 180 ˚C), then press down on the label with the iron for about
15 seconds.
5 Allow the iron-on transfer to cool (for about 60 seconds), and then carefully remove the
backing paper.
ABC
To Next Page
Loading...
