Brother P-Touch 2400 - Page 25

21
FORMATTING THE TEXT
Now the text is entered as we wish. If it were printed, the standard default settings would be
used. The text would be aligned on the left side with 25 mm margins and would not be framed
or underlined. In addition, the characters would be auto-sized (AUTO) and printed using the
HELSINKI font and NORMAL style settings. For more details concerning format settings,
please see pages 70 through 84.
For this label, though, let’s assume we want a different style of text: BRUSSELS font, framed,
and printed with 4 mm margins (NONE). Therefore, we must change the format.
To select the BRUSSELS font setting:
A
While holding down , press
once, and keep held down to dis-
play the current font setting.
B While still holding down , con-
tinue pressing until BRUSSELS is
displayed, and then release .
To select the ROUND frame setting:
C
While holding down , press
once, and keep held down to dis-
play the current frame setting.
D While still holding down , continue
pressing until ROUND is displayed,
and then release .
HELSINKI
FONT
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
Font
✱
1
æ
Code
BRUSSELS
FONT
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
Font
✱
1
æ
Code
OFF
FRAME
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
é
=
6
ABC
Code
ROUND
FRAME
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
é
=
6
ABC
Code