25
ENTERING THE TEXT
Now, we can begin entering the text for our storage shelf label.
Each time the number of lines in a section of the text changes, a new block of text must be cre-
ated. Therefore, the text for our label must be entered in three separate blocks.
Since we will now change from a one-line to a three-line block, we will use the New block
function instead of a normal return. The new block mark ( ) indicates the end of a block.
For more details on the New block function, refer to
NEW BLOCK FUNCTION
on page 40.
To input the shelf number (the first block of text):
3
Type in “B1”.
To create a new block of text:
4
Hold down and press
once.
To enter the company address (the second block of text):
5
Type “ABC Transport”, and then press
.
1:
B1_
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
1:
_
1:
B1
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
New Block
2:
_
1:
ABC Transpo
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
New Block
To Next Page
Loading...
