58
To type in a symbol:
1 Hold down c and press a. A row of symbols appears in the display.
2 Press e or h to display different rows of symbols and press f or w until the
desired symbol appears enlarged within the frame in the middle of the display.
3 Press _. The symbol is added to the text.
☞ To type in a series of symbols, hold down c before pressing _. Then, con-
tinue adding symbols by selecting them as explained in step
2
, and holding down
c while pressing _. Press just _ after selecting the last symbol in the
series.
EXAMPLE
To add the symbol “ ”:
1
Hold down c and press a.
2 Press e or h until the row containing “ ”
appears, and then press
f or w until “ ”
appears in the frame.
3 Press _.
Ü
1:
DANGER _
To Next Page
Loading...
