9
To install the P-touch Quick Editor
software, click the middle button (P-
touch Quick Editor). Continue with the
procedure in INSTALLING THE P-
TOUCH QUICK EDITOR SOFTWARE
on page 11.
4 Carefully read the contents of the Welcome
dialog box, and then click the Next button to
continue. The User Information dialog box
appears.
5 Type the necessary information into the
appropriate boxes (If the information has
already been registered in Windows
®
, it will
automatically appear.), and then click the
Next button. A dialog box appears, asking for
confirmation of the entered information.
6 Click the Yes button to register the entered
information.
☞ To change the registration information,
click the No button, and then return to
step 5.
The Setup Type dialog box appears.
7 Select the installation method, and then click
the Next button.
•For a Typical or Compact installation
Selecting “Typical” or “Compact”, then
clicking the Next button immediately starts
installation.
Typical: All of the basic options (P-touch
Editor 3.2, Clip art, Auto Format templates,
Help and fonts) are installed.
Compact: Only P-touch Editor 3.2 is
installed.
To Next Page
Loading...
