Brother P-touch D450 - Setting Label Attributes; Using Auto-Format Layouts

EDITING A LABEL
28
Setting Label Attributes ([ 長度 ]/[ 兩端空白 ]/[ 標籤空白長度 ])
Setting Label Attributes ([ 長度 ]/[ 兩端空白 ]/[ 標籤空白長度 ])
長度 :[ 長度 ] can be set within the range 30 - 300 mm. When
[ 自動 ] is selected, the length of the label is automatically
adjusted based on the amount of text entered.
兩端空白 :Refer to “Setting Tape Cutting Options” on page 38.
標籤空白長度 :Refer to “To change the tab length” on page 18.
NOTE
You can also set the label and tab length by typing in the desired
length. To apply the setting, after typing in the length, press ( ) or
( ) and then ( ) or ( ) again.
Using Auto-Format Layouts
 Using Templates
Simply select a layout from the templates, enter the text and apply
formatting as desired.
Example - Asset Tag:
()  / Select an attribute  ( ) or ( )  / Set
a value for the attribute
 () or ( )  ( ) to return to the text
entry screen.
()  / [ 預設格式 ]  () or ( )  / [ 用途分類範例 ]
 ( ) or ( )  / [資產管理 ]  ( ) or ( ) 
/ [資產標籤 ]
 ( ) or ( )  Enter the text  () or
()
 Enter the text for the next field  ( ) or ( ) 
/ Select an attribute for barcode
 / Set a value for the attribute 
( ) or ( )
 Type in the barcode data  () or ( ) 
/ [列印 ]
 ( ) or ( )  / Select the number of labels
to be printed
 ( ), ( ) or ( ).