Brother P-touch D450 - Tape Cutting Options

39
Setting Tape Cutting Options
LABEL PRINTING
Tape Cutting Options
Setting Description Example
大
Each label is printed, leaving
a margin of 23.9 mm on each
end.
小
A margin of 22.5 mm is
printed first, and then each
label is printed, leaving a
margin of 4 mm before and
after the text.
省帶
• Select this setting when
printing several labels with
minimum margins.
• Feed the tape before using
the cutter. Otherwise a part
of the text may be cut off. Do
not try to pull the tape since
this may damage the tape
cassette.
• A margin of 22.5 mm is
printed first, and then each
label is printed, leaving a
margin of 4 mm before and
after the text.
不裁切
• Select this setting when
printing multiple copies of a
label or when using Fabric
Tapes or other special
tapes that cannot be cut by
the tape cutter of the
P-touch.
• Feed the tape before using
the cutter. Otherwise a part
of the text may be cut off. Do
not try to pull the tape since
this may damage the tape
cassette.
• When using the special tapes
that cannot be cut by the tape
cutter of the P-touch, remove
the tape cassette from the
P-touch and use scissors to
cut the tape.
ABC
23.9 mm 23.9 mm
ABC
22.5 mm 4 mm4 mm
4 mm
DEFABC
ABC
23.9 mm 4 mm