X Changing Label Width
X Changing Label Length
NOTE
• After the label is printed, cut along the printed
dots (:) with scissors so that the label length
matches what is displayed on the LCD.
• If a specific label length has been selected,
also appears in the LCD.
• By pressing the Space key, [Auto] is displayed.
• To change a setting back to default, press the
Space key.
X Deleting Text
NOTE
X Preview
You can preview the text before printing.
• Pressing the Preview key displays a generated
image of the label, and may differ from the
actual label when printed.
• When the LCD cannot display all the text at
once, press / to display the hidden
text.
• Press // to leave the preview
mode.
X Feeding (Tape Feed)
• This function feeds approximately 25 mm of
blank tape.
Entering Text (continued)
/ [Width]
/ [Normal/x2/x1/2]
Width Normal
× 2
× 1/2
/ [Label Length]
/ [Auto/30-300 mm]
Press .
• To delete all text and settings or text only,
press
/ [Text&Format]/[Text Only]
Printing Labels
/ [Feed]
To Next Page
Loading...
