Brother P-TOUCH H110 - Getting Started Guide; Power Supply and Tape Cassette Installation

GETTING STARTED
Power Supply and Tape Cassette
Open the cassette cover by pressing the
highlighted area at the top end of the machine.
• Make sure you turn the power off when replacing batteries
or tape cassettes.
Insert a tape cassette, making sure it snaps into
place.
• Make sure the end of the tape feeds under the tape guides.
• Use Genuine Brother P-touch TZe tapes with this machine.
1
Print head
Tape cutter leverCassette cover
1
Tape exit slot
Toothed Wheel
Cutter's edge
End of tape
Tape guides
2
With your new Brother P-touch labelling machine, you can create a wide variety of custom, self-adhesive labels. This
machine uses Brother "TZe" tapes from 3.5 mm to 12 mm widths. "TZe" tape cassettes are available in many
colours and sizes. Visit
www.brother.com for a complete list of tapes that work with your machine.
Read this manual carefully before starting and keep it in a handy place for future reference.
Printed in China
LAK038001
English
User’s Guide
H11
0
NOTE
When using the optional AC adapter
1. Insert adapter cord into the AC adapter socket at the bottom of the machine.
2. Insert the plug into the nearest standard electrical socket.
For the memory backup feature, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03)
together when using the AC adapter.