39
With the Font function, you can choose one of four fonts for your text.
The following font settings are available:
The default font setting is FONT 1.
To change the font setting:
1 While holding down c, press 1 once, and keep c held down to display the
current font setting.
2 While still holding down c, continue pressing 1 until the desired font setting is
displayed.
3 Release c to apply the selected font setting to the entire text.
EXAMPLE
To select the FONT 2 font setting:
1
While holding down c, press 1 once,
and keep c held down.
2 While still holding down c, continue pressing
1 until FONT 2 is displayed.
3 Release c.
FONT FUNCTION
1
FONT
Caps
Alt
2
FONT
Caps
Alt
A
To Next Page
Loading...
