Brother P-Touch PT-2730 User Manual (English)

Other manuals for Brother P-Touch PT-2730

Service Manual105 pages

Guía Del Usuario96 pages

Software Installation Guide1 page

Guía De Instalación Del Software1 page

Questions and Answers:

B
Brian WattsAug 22, 2025
Why is my Brother Label Maker not printing?
- N
  Nicholas SkinnerAug 22, 2025
  If the Brother P-touch label is not printed after pressing the Print key, make sure that text has been entered and that the tape cassette is correctly installed with sufficient tape remaining. If the tape is bent, cut off the bent section and thread the tape through the tape exit slot. If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Ensure the tape end passes through the tape guide before reinstalling the cassette.
K
Kathy Barnes DDSSep 1, 2025
Why does my Brother Label Maker say 'Tape Cassette Changed!'?
- M
  Mark ClarkSep 1, 2025
  If the Brother P-touch labeler displays 'Tape Cassette Changed!', it means the tape cassette was changed while printing. Make sure the correct tape cassette is inserted before printing.
L
latoya05Aug 31, 2025
What does 'Battery Weak!' mean on my Brother Label Maker?
- S
  Stacy RiveraAug 31, 2025
  If the Brother P-touch labeler displays 'Battery Weak!', it means that the installed batteries are getting weak.
M
Mitchell CarpenterAug 30, 2025
What to do if Brother Label Maker says 'Insert Tape Cassette!'?
- M
  Mr. Logan Turner Jr.Aug 30, 2025
  If your Brother P-touch labeler displays 'Insert Tape Cassette!', it means there is no tape cassette installed when you try to print or preview a label, or feed tape. Install a tape cassette before continuing.
P
patriciatownsendAug 28, 2025
Why does my Brother P-Touch PT-2730 say 'No Text!'?
- T
  Travis PetersenAug 28, 2025
  If your Brother P-touch labeler displays 'No Text!', it means no text, symbols, or barcode data was entered before attempting to print or preview a label. Enter data before continuing.
R
Robert EvansAug 27, 2025
What does 'Cutter Error!' mean on my Brother P-Touch PT-2730?
- A
  Angela FitzpatrickAug 27, 2025
  If the Brother P-touch labeler displays 'Cutter Error!', turn the P-touch labeler off and then on again before continuing. If tape is tangled in the cutter, remove the tape.
J
John ThomasAug 27, 2025
What to do if my Brother Label Maker freezes?
- Q
  qrasmussenAug 27, 2025
  If the Brother P-touch labeler screen 'locks' or doesn't respond normally, refer to “Resetting the P-touch Labeler” on page 70 and reset the internal memory to the initial settings. If resetting doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
D
Douglas DixonAug 25, 2025
Why does my Brother Label Maker stop while printing?
- C
  Christopher MortonAug 26, 2025
  If the Brother P-touch labeler stops while printing, replace the tape cassette if striped tape is visible, indicating the end of the tape. Alternatively, replace all batteries or connect the AC adapter directly to the P-touch labeler.
M
Matthew SullivanAug 25, 2025
Why is my Brother P-Touch PT-2730 not cutting automatically?
- B
  Brenda ThompsonAug 25, 2025
  If the Brother P-touch label is not cut automatically, check that the Cut Option setting is not set to Chain or No Cut, as the tape will not be fed after printing the label. Alternatively, hold down the Shift key and press the Preview key to feed and cut the tape.

Brother P-Touch PT-2730 Specifications

General

Print technology	Thermal transfer
Vertical printing	Yes
Maximum resolution	180 x 180 DPI
Maximum print height	18 mm
Display	LCD
Product color	Black, White
Keyboard layout	QWERTY
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Tape size	24 mm
Dimensions (WxDxH)	177.8 x 238.7 x 71.1 mm
Battery type	AA
Battery technology	Alkaline
Number of batteries supported	8
Minimum RAM	128 MB
Minimum storage drive space	70 MB
Compatible operating systems	Windows XP, Windows Vista, Windows 7; Mac OS X 10.4.11 - 10.6.x
Tape type	TZ
Tape cutting	Automatic
Number of styles	11
Built-in barcodes	CODABAR (NW-7), EAN13, EAN8, Industrial 2/5, UPC-A, UPC-E
Ribbon length	8 m
Maximum label length	300 m