Brother P-touch QL-700 User Manual

PREFACE
This publication is a service manual covering the specifications, theory of operation, disassembly/
reassembly procedure, and troubleshooting the Brother QL-700. It is intended for service personnel
and other concerned persons to accurately and quickly provide after-sale service for our QL-700.
To perform appropriate maintenance so that the machine is always in best condition for the
customer, the service personnel must adequately understand and apply this manual.
This manual is made up of four chapters and appendices.
CHAPTER I: SPECIFICATIONS
CHAPTER II: THEORY OF OPERATION
CHAPTER III: DISASSEMBLY AND REASSEMBLY
CHAPTER IV: TROUBLESHOOTING AND ERROR MESSAGE
APPENDIX 1: SERVICEMAN SOFTWARE TOOL (Version 1.00)
© Copyright Brother 2011
All rights reserved.
No part of this publication may be reproduced in any
form or by any means without permission in writing
from the publisher.
Specifications are subject to change without notice.

Brother P-touch QL-700 Specifications

General

Print Technology	Direct Thermal
Maximum Tape Width	62 mm
Print Resolution	300 dpi
Connectivity	USB
Cutter	Automatic
Operating Systems Supported	Windows, Mac
Label Types	Die-cut labels, continuous tape
Compatible Label Width	62 mm
Power Source	AC adapter