To Next PageTo Next PageWhat to do if my Brother S-6200A displays error E132?
If your Brother Sewing Machine displays error code E132, the motor or the drive PCB may have a problem. Consider replacing the motor or the control box.
How to fix Brother S-6200A Sewing Machine if it does not operate at high speed?
If your Brother Sewing Machine is not operating at high speed, check the sewing speed setting or backtack speed setting. Set the maximum sewing speed to a higher speed if needed.
Why are the upper and lower threads breaking on my Brother S-6200A Sewing Machine?
If the upper and lower threads are breaking on your Brother Sewing Machine, there could be several reasons: * The needle might be bent or broken: Replace the needle if it is damaged. * Incorrect needle installation: Install the needle correctly. * Improper threading: Thread the machine correctly. * Tension issues: Adjust the upper or lower thread tension. * Thread take-up spring: Adjust the position of the thread take-up spring. * Damaged parts: Smooth damaged parts or replace them. * Damaged thread path: Smooth or replace the damaged part.
Why does my Brother S-6200A Sewing Machine stop during sewing?
If your Brother Sewing Machine stops during sewing, it might be due to the fixed stitch key being turned on, so press the fixed stitch key to turn the indicator off. Also, check the power supply, as a low voltage can cause the machine to stop.
How to fix upper thread if it is not tight on Brother S-6200A?
If the upper thread is not tight on your Brother Sewing Machine, adjust the upper thread tension or lower thread tension. Also, advance the needle timing.
What to do if my Brother S-6200A Sewing Machine displays error E065?
If your Brother Sewing Machine displays error E065, first, turn off the power and ensure that no operation panel keys are being pressed when you turn the machine on. If the problem persists, the operation panel may be malfunctioning and require replacement.
What to do if my Brother S-6200A Sewing Machine displays error E131?
If your Brother Sewing Machine displays error code E131, first, turn off the power and check that the 10-pin resolver connector is connected to connector P6 on the main PCB inside the control box. If the issue continues, the motor or the main PCB may have a problem and need replacement.
What to do if my Brother Sewing Machine displays error E705?
If your Brother Sewing Machine displays error code E705, check the power supply voltage to ensure it is not abnormally low. If the problem persists, there may be an issue with the control box, and it might need replacement.
Why is the material slipping on my Brother S-6200A?
If the material is slipping while sewing with your Brother Sewing Machine, adjust the presser foot pressure.
What to do if my Brother S-6200A Sewing Machine does not operate when power is on?
If the power supply connector is disconnected from the control box, insert the connector securely.
General| Type | Industrial Sewing Machine |
|---|---|
| Lubrication | Automatic |
| Free Arm | No |
| Maximum Stitch Length | 4 mm |
| Application | Apparel |
| Stitch Length | 4mm |
| Needle | DB x 1 |
| Presser Feet | Standard Presser Foot |
