What to do if loops appear in seam on my Brother Sewing Machine?
If you find loops appearing in the seam of your Brother Sewing Machine, first check if the thread path is not smooth enough. If so, polish the thread path with a fine-grain file or sandpaper. Also, check if the bobbin isn't turning smoothly. Pull out the lower thread to ensure there's no slackness in the thread tension, and consider replacing the bobbin or bobbin case.
How to fix lower thread that is not tight on my Brother Sewing Machine?
If the lower thread isn't tight on your Brother Sewing Machine, it could be that the lower thread tension is too weak, or the upper thread tension is too strong. Adjust the lower and upper thread tensions accordingly.
How to fix upper thread that is not tight on my Brother S-7200A Sewing Machine?
If the upper thread is not tight on your Brother Sewing Machine, it might be because the upper thread tension is too weak, or the lower thread tension is too strong. Try adjusting both the upper and lower thread tensions to resolve this.
What does 'Err 1' mean on my Brother S-7200A Sewing Machine?
If 'Err 1' appears, the power supply voltage may be abnormally high. Check the voltage. Alternatively, there may be a problem with the control box, so replace the control box.
Why does nothing appear on the operation panel display of my Brother S-7200A Sewing Machine?
If nothing appears on the operation panel display, the power supply connector might be disconnected from the control box. Insert the connector securely. Alternatively, the operation panel connector inside the control box might be disconnected; insert that connector securely as well.
Why is the oil gauge not visible in the oil gauge window of my Brother S-7200A?
If the oil gauge is not visible in the oil gauge window, the oil tank may be empty. Fill the oil tank with oil.
What causes broken needles on my Brother Sewing Machine?
Broken needles can occur if the material is being pushed or pulled with excessive force during sewing. Ensure the needle is properly installed. Also, the needle might be bent, the needle tip broken, or the needle hole blocked, so replace the needle.
Why is there a large degree of puckering (excess tension) when using my Brother S-7200A Sewing Machine?
If you're experiencing a large degree of puckering (excess tension) with your Brother Sewing Machine, try the following: Weaken the upper and lower thread tensions as much as possible. Also, make the thread take-up spring tensions as weak as possible. Adjust the presser foot pressure and reduce the sewing speed using the sewing speed control keys.
Why are the upper and lower threads breaking on my Brother S-7200A Sewing Machine?
If the upper or lower threads are breaking on your Brother Sewing Machine, several factors could be at play. First, ensure the needle isn't bent or broken; replace it if necessary. Double-check that the needle is correctly installed and the machine is properly threaded. Insufficient lubrication of the rotary hook can also cause this issue; add oil if the oil gauge is low. Also, check and adjust the upper and lower thread tension if they are too weak or too strong. Lastly, inspect the rotary hook, feed dog, and other parts for damage; smooth them or replace them if needed.
General| Type | Industrial Sewing Machine |
|---|---|
| Model | S-7200A |
| Stitch Type | Lockstitch |
| Max. Sewing Speed | 5, 000 stitches per minute |
| Max Stitch Length | 4.5 mm |
| Needle Bar Stroke | 30.7 mm |
| Needle Type | DB×1 (#11) #9~#18 |
| Motor | Direct Drive Motor |
| Foot Lift | By hand: 5.5mm, By knee: 13mm |
| Lubrication | Automatic oiling system |
Explains the meaning of safety indications and symbols used in the manual.
Outlines safety precautions and general guidelines for sewing operations.
Details the lubrication procedure for specific machine specifications.
Details the lubrication process for the machine's gearbox.
Specific instructions on connecting the sewing machine cords.
Explains the procedure for connecting the ground wire for safety.
Guides on how to perform a test operation of the machine using the treadle.
Step-by-step instructions for correctly installing the sewing machine needle.
Provides instructions for winding thread onto the bobbin.
Explains the correct method for inserting the bobbin case into the machine.
Step-by-step guide on how to thread the upper thread through the machine.
Instructions on how to adjust the stitch length setting on the machine.
Identifies the keys and displays on the operation panel and their basic functions.
Guides on setting and performing start and end backtack stitches.
Explains how to sew a fixed number of stitches using the operation panel.
Details how to sew name labels using repeating stitch patterns.
Explains the procedure for sewing pleat presser stitches.
Identifies advanced operation panel keys and their functions.
Details how to adjust the needle stop position using the operation panel.
Basic steps to start and perform sewing operations.
Explains how to perform backtacking during sewing.
Details how to sew condensed stitches and the necessary settings.
Provides instructions for adjusting both upper and lower thread tensions for optimal stitches.
Explains how to adjust the presser foot pressure for different materials.
Outlines the daily cleaning tasks to maintain machine performance and longevity.
Guides on applying grease when the machine indicates it is needed.
To Next Page
