Notes during cleaning
CAUTION
• Turn off the power switch and disconnect the power cord before carrying out these operations. The
machine may operate if the treadle is depressed by mistake, which could result in injury.
• Secure the table so that it will not move when tilting back the machine head. If the table moves, it
may crush your feet or cause other injuries.
• Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine head may cause your hand to slip, and your hand
may get caught.
• Do not hold the machine head by the panel when tilting it back or returning it to its original position.
Otherwise, it may result in injury or damage to the sewing machine.
• Be sure to wear protective goggles and gloves when handling the lubricating oil and grease so that
they do not get into your eyes or onto your skin. Otherwise inflammation can result. Furthermore, do
not drink the oil or eat the grease under any circumstances. Diarrhea or vomiting may result. Keep
the oil and grease out of the reach of children.
Notes during maintenance and inspection
CAUTION
• Turn off the power switch and disconnect the power cord plug before carrying out inspection,
adjustment or repairs, or when replacing consumable parts such as the rotary hook or knives. The
machine may operate if the treadle is depressed by mistake, which could result in injury.
• If the power switch needs to be left on when carrying out some adjustment, be extremely careful to
observe all safety precautions.
• Secure the table so that it will not move when tilting back the machine head. If the table moves, it
may crush your feet or cause other injuries.
• Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine head may cause your hand to slip, and your hand
may get caught.
• Do not hold the machine head by the panel when tilting it back or returning it to its original position.
Otherwise, it may result in injury or damage to the sewing machine.
• Maintenance and inspection of the sewing machine should only be carried out by a qualified
technician.
• Always be sure to turn off the power switch and then wait one minute before opening the motor
cover. If you touch the surface of the motor, it may cause burns.
• Ask your Brother dealer or a qualified electrician to carry out any maintenance and inspection of the
electrical system.
• When replacing parts and installing optional parts, be sure to use only genuine Brother parts.
Brother will not be held responsible for any accidents or problems resulting from the use of non-
genuine parts.
• If any safety devices have been removed, be absolutely sure to re-install them to their original
positions and check that they operate correctly before using the machine.
Note regarding modification
CAUTION
• To prevent accidents and problems, do not modify the sewing machine (including control devices) by
yourself. Brother will not be held responsible for any accidents or problems resulting from
modifications made to the sewing machine.
iv
To Next Page
Loading...
Need help?
General
