20 Icon System Manual T02985_02_03
MRI System Overview
2.7.2 Magnet mounted RF Coil
As an alternative to the animal bed mounted RF Coils, the ICON can be equipped with an
RF Coil mounted from the rear side of the instrument. For further information refer to section
5.2.3.2 and Technical Documentation/Components/ RF Coils/Rat Body 60 mm RF Coil.
1H transmit/receive rat body coil, inner diameter: 60 mm
Figure 2.11: Rat body RF Coil, inner diameter 60 mm
2.8 Operating Console
The host computer is the operating console to control the MR system. It works with
the LINUX operating system. The ParaVision software is used to set up, acquire,
process and visualize MRI imaging data. Please refer to the operating instructions of
ParaVision for a detailed software description.
The LCD monitor is attached to the host computer and must be switched on or off
separately.
The MR system is equipped with a standard keyboard and a two-button wheel mouse.
Do not install other than Bruker released programs on the host computer. The
functionality and performance of ParaVision might be disturbed.
To Next Page
Loading...
