Need help?Do you have a question about the Bruker BSMS/2 and is the answer not in the manual?
General| Brand | Bruker |
|---|---|
| Model | BSMS/2 |
| Category | Laboratory Equipment |
| Language | English |
Describes the basic system of the BSMS/2 and its hardware components.
Warns about potential issues when powering on the system due to startup current.
Provides initial steps for identifying and resolving common issues using LEDs.
Details the BSMS/2 chassis structure, including front and back racks.
Explains general installation requirements and slot configuration for the chassis.
Describes the standard VMEBus and dedicated USERBus within the BSMS/2 backplane.
Lists dimensions, weight, and board specifications for the BSMS/2 chassis.
Introduces the two power supply modules (PSB1, PSB2) and their role in the system.
Guides through the process of installing power supply modules, including voltage selection.
Offers solutions for power supply related problems, including fuse checks and fan issues.
Details the step-by-step procedure for replacing a power supply board (PSB).
Explains the location and ratings of fuses on the power supply boards.
Provides specifications for regulated and non-regulated voltages from the PSBs.
Explains the central role of the CPU/3 subsystem in BSMS/2 operation.
Guides on how to install the CPU module into the BSMS mainframe.
Describes the MC68306 microcontroller and its integrated interfaces.
Details the special interfaces handled by the CPU, including serial and I2C.
Lists specifications for the CPU controller section, including processor and memory.
Describes the BSMS keyboard's function as an I/O device for spectrometer parameters.
Guides on how to connect and install the BSMS keyboard to the CPU.
Details the processor system and software of the keyboard controller board.
Explains the layout of keys, LEDs, and the alphanumeric display on the keyboard.
Lists technical specifications for the BSMS Keyboard, including voltage and serial link.
Describes the line module containing the mains switch, filter, and cooling fans.
Shows the wiring connections within the BSMS/2 chassis, including power and fans.
Illustrates the wiring connections for the User Bus across different slots.
Introduces the BVT and its additional supply board (BSMS/2 PS BD BVT3200 400VA).
Provides step-by-step instructions for installing the BVT modules into the BSMS/2 rack.
Shows the physical placement plan of components on the PSB1 board.
Shows the physical placement plan of components on the PSB2 board.
Illustrates the electrical connections and power distribution between PSB1 and PSB2.
To Next Page