Need help?Do you have a question about the Bruker Fourier 300 and is the answer not in the manual?
General| Magnet | Permanent |
|---|---|
| Magnetic Field Strength | 7.05 Tesla |
| Magnet Type | Cryogen-free |
| Software | TopSpin |
| Technique | NMR Spectroscopy |
| Sample Diameter | 5 mm |
| Temperature Range | -150°C to +150°C |
| Applications | Chemistry, Biochemistry, Pharmaceuticals |
Details the purpose, scope, and intended audience of this service manual.
Outlines Bruker's policy regarding product improvements and specification changes.
Explains safety symbols, signal words, and conventions used for hazard indication.
Describes the Fourier 300 as a compact, powerful NMR spectrometer for routine use.
Specifies the minimum qualifications, training, and experience required for service personnel.
Provides information on Bruker's customer service and guidelines for returning the device.
Covers general safety, personnel qualifications, PPE, and unauthorized access.
Details workplace, electrical, mechanical, gas, radiation, temperature, and chemical dangers.
Provides guidance on handling pollutants and understanding warning signs.
Highlights the importance of using genuine spare parts to maintain warranty.
Emphasizes the necessity of using non-magnetic tools, especially when working near magnets.
Introduces the Fourier 300 console and lists its main components.
Provides detailed descriptions of system units like Ethernet, Can-Bus, and other devices.
Overviews all input and output connections available on the console.
Lists optional accessories that can be used with the Fourier system.
Covers unpacking, wiring, air pressure adjustment, and first-time power-on.
Details the process of configuring the Fourier system using the 'cf' command.
Guides through setting up pulse programs, solvents, lock parameters, and magnet field.
Explains lock system operation, finding the lock signal, and probe tuning procedures.
Outlines the hardware tests performed during customer acceptance.
Setting up network configuration and performing firmware/FPGA updates.
Details configuration options for Main Board, Shim Control, GAB/2, Lock Board, and VTU.
Details configuration for sample lift, spin, helium level, and temperature monitoring.
Guides on running applications to test RF signals and system functionality.
Explains the fundamental principles and structural elements of pulse programs.
Details the XML syntax used for defining delays, pulses, gradients, and acquisition.
Provides visual representations of the Fourier 300 console's internal wiring.
Details the terminal connections for various components of the console unit.
Outlines recommended maintenance tasks for ventilators and filters.
Stresses that all repair work must be performed by trained personnel.
Provides guidelines for cleaning the device's external surfaces using water.
Details procedures for safe dismantling and environmentally compliant disposal of components.
Lists detailed specifications for transmit, receiver, gradient, and shim systems.
Provides specifications for lock, peripheral control, temperature, and software environment.
Lists contact information for Bruker Corporation, including address and phone number.
Offers information on how to contact Bruker's NMR service centers for support.
A comprehensive list of warning signs with their corresponding page numbers for easy reference.
Provides lists of all figures and tables included within the manual.
An alphabetical index of all topics covered in the manual for quick topic lookup.
To Next Page
