138
Z31980_00_03
Cleaning and Disposal
11.4 Dismantling
Before starting dismantling:
• Shut down the device and secure to prevent restarting.
• Physically disconnect the power supply from the device; discharge stored residual
energy.
• Remove consumables, auxiliary materials and other processing materials and dis-
pose of in accordance with the environmental regulations.
• Dismantle the device by following the installation instructions in reverse.
Clean assemblies and parts properly and dismantle in compliance with applicable local
occupational safety and environmental protection regulations.
11.5 Disposal Intructions
If no return or disposal agreement has been made, send the dismantled components for
recycling.
• Scrap metals.
• Send plastic elements for recycling.
• Sort and dispose of other components in accordance with their material composi-
tion.
WARNING
Danger of injury due to improper dismantling!
Stored residual energy, angular components, points and edges on and in the device
or on the tools needed can cause injuries.
Ensure sufficient space before starting work.
Handle exposed, sharp-edged components with care.
Dismantle the components properly.
Secure components so that they cannot fall down or topple over.
Consult the manufacturer if in doubt.
To Next Page
Loading...
