Bruker Fourier 300 User Manual

61
Z31980_00_03
Installation
6.7.5 Configuring the Transmitter and Preamplifier Pre-delays
The command edscon allows to set the pre-delays for the transmitters and preamplifi-
ers. Currently, these are not used by the Fourier system. Instead, they are preset to rea-
sonable values. These can be changed on the Fourier web page. This may be changed
in future releases. For now, changing these values will not effect the hardware settings.

Bruker Fourier 300 Specifications

General

Brand	Bruker
Model	Fourier 300
Category	Laboratory Equipment
Language	English