10
Z31980_00_03
Introduction
2.2 Limitation of Liability
All specifications and instructions in this manual have been compiled taking account of
applicable standards and regulations, the current state of technology and the experience
and insights we have gained over the years.
The manufacturer accepts no liability for damage due to:
• Failure to observe this manual
• Improper use
• Deployment of untrained personnel
• Unauthorized modifications
• Technical modifications
• Use of unauthorized spare parts
The actual scope of supply may differ from the explanations and depictions in this man-
ual in the case of special designs, take-up of additional ordering options, or as a result of
the latest technical modifications.
The undertakings agreed in the supply contract as well as the manufacturer's Terms and
Conditions and Terms of Delivery and the legal regulations applicable at the time of con-
clusion of the contract shall apply.
2.3 Before you begin
This service manual contains information and safety information that are necessary for
the installation and sevicing of the device.
All maintenance and repairs are to be accomplished using the information in this man-
ual. At the same time references over general maintenance and care from the User
Manual are also to be followed.
Consider all safety references!
Be sure that no NMR measurement is in progress during the installation as it might be
disturbed.
Information for ordering spare parts is available in the spare parts section from the
Bruker Service Center (see "Contact" on page 145).
To Next Page
Loading...
Need help?
General
