Bruker Fourier 300 User Manual

86
Z31980_00_03
Configuration
7.4.1 Main Board
7.4.1.1 BIS EEPROM Settings
In order for the main board to be recognized as a Fourier component, the following
entries need to be made in NAME group part of the BIS EEPROM. This is accessed via:
Main -> minispec -> BIS information
i
Notice: The names “minispec” and “dreamspec” are historical and are used internally
only.

Bruker Fourier 300 Specifications

General

Brand	Bruker
Model	Fourier 300
Category	Laboratory Equipment
Language	English