Bruker Fourier 300 - Lock Board

96
Z31980_00_03
Configuration
You can check the presence of the GAB/2 Backplane and the GAB/2 Gradient amplifier
using:
Main-> minispec –> GAB/2 System -> Base functions
You can check is an LVDS link is present using
Main-> minispec –> GAB/2 System -> GAB/2 Menu -> GAB/2 Control
7.4.4 Lock Board
In order for the lock main board to be recognized as a Fourier component, the following
entries need to be made in NAME group part of the BIS EEPROM. This is accessed via: