EasyManua.ls Logo

Bruker Fourier 300 - Maintenance and Repairs Guidance; Routine Maintenance Procedures; Professional Repair Requirements

Bruker Fourier 300
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
135
Z31980_00_03
10 Maintenance and Repairs
The Console is almost maintenance free. It is recommended to regularly every 6 to 12
months) depending on the environment to check and if necessary clean the filter mat for
the ventilators. The filter tray page 135/(1) can be removed without taking the console
cover off.
Figure 10.1 The filter tray
The filter itself can be cleaned with ordinary tap water and should be dried before replac-
ing. Do not operate the instrument without filter for prolonged times, since dirt will build
up in the electronics.
Repairs on the console should only be carried out by trained Bruker personnel.
For probe and magnet maintenance, refer to the relevant manuals.

Table of Contents

Other manuals for Bruker Fourier 300

Related product manuals