54
Z31980_00_03
Installation
6.7.1 Installation of Pulse Programs and Parameter Sets
Clicking on “Expinstall” starts the installation and conversion of pulse programs and
datasets. Choose “Installation for Spectrometer”.
The next window will show an entry “Fourier” after finalizing TopSpin 3.1. click on it to
install Fourier specific pulse programs and parameter sets.
On the following window, one can choose which files should be installed: pulse pro-
grams, AU programs, CPD programs, shape files, etc.
Followed by the selection window for printer and plotter.
The last window lets one select the digitizer and default acquisition mode.
Follow the next few screen shots using default settings:
To Next Page
Loading...
