Bruker Fourier 300 - Technical Specifications Overview; System Component Specifications

141
Z31980_00_03
12 Technical Specifications
Transmit Channels
Frequency Range 5 – 405 MHz
No of Channels 2
Frequency Resolution 0.25 Hz
No of Phases 4
Timing Resolution 20 ns
Transmit Power for 1H ca. 50 W
Transmit Power for X Channel (13C, 15N) ca. 200W
Power Level Adjustment 0 - 60 dB in 1dB steps
Amplitude Variation 14-bit
Table 12.1 Transmit Channels
Receiver Channel
No of Channels 1
ADC 50 MHz 14-bit
Effective Resolution 16.5 bits per complex pair at 1 MHz
Detection Type Direct Digital Quad Detection
No of Phases 4
Analog Bandwidth 3 MHz
Digital Filter FIR Filter 1kHz to 6 MHz in steps of factor 2
Max No of points per acquisition 2 x 32k (after decimation)
Table 12.2 Receiver Channel
Gradient Control
No. of Channels 1 internal (GAB/2), 3 external possible
Gradient Interface LVDS (80 MHz)
Table 12.3 Gradient Control
Shim System
No of Shim Channels 20 (BOSS1 compatible)
Shim Resolution 16-bit
Shim Current max 300 mA per channel
Shim Temperature Monitor yes
Table 12.4 Shim System