59
Z31980_00_03
Installation
The last step of probe definition ist the signal routing to the preamplifiers which looks like
the figure below:
6.7.4 Configuring the Lock Parameters
edlock gives access to the lock parameters being used for different solvents. The lock
parameters for the Fourier are different from those for the Avance BSMS. Whereas the
solvent related parameters as “Distance” (in ppm) or “Field-Correction” (in Hz) are
unchanged, the hardware related parameters as “Lock Power” and the PID values are
different. The Fourier comes with its own list which is installed by cf.
To Next Page
Loading...
